"Maximum allowed artifact storage size of 1000 Mb will be exceeded."

Lynix's Avatar

Lynix

05 Dec, 2017 12:05 PM

Hi,

It's been a few weeks that every of my AppVeyor build fails with the error "Maximum allowed artifact storage size of 1000 Mb will be exceeded." which I don't understand because the artifact weight actually 60MiB (as shown on 7-Zip log).

Here's an example of failing build: https://ci.appveyor.com/project/DrLynix/nazaraengine/build/master-rev10/job/qnv73ipqxry176ft

I initialy though I exceeded some total artifact storage quota and deleted the AppVeyor project then reenabled it, but nothing changed.

What's the problem here?

Thanks in advance

Showing page 3 out of 8. View the first page

  1. 61 Posted by Leonid Tsarev on 28 Jan, 2018 02:27 PM

    Leonid Tsarev's Avatar

    I'm blocked with my deployment even to test environments :-(

  2. 62 Posted by xeijin on 28 Jan, 2018 03:16 PM

    xeijin's Avatar

    I'm having the same issue now. I will only have need to store 1 6-700mb artifact at a time (particularly as I'm deploying to Github anyway) so happy to have my existing deleted if that helps.

    https://ci.appveyor.com/project/xeijin/propositum

    Thank you.

  3. Support Staff 63 Posted by Ilya Finkelshte... on 29 Jan, 2018 05:29 PM

    Ilya Finkelshteyn's Avatar

    Leonid Tsarev, xeijin should be unblocked now.

  4. 64 Posted by Matheus Degiova... on 30 Jan, 2018 09:19 AM

    Matheus Degiovani's Avatar

    Hello,

    I'm also getting this message on one of my open source projects. Any chance I can get the storage limits bumped? I also only need to store the artifact until the upload to github completes, after that it can be erased.

  5. Support Staff 65 Posted by Ilya Finkelshte... on 30 Jan, 2018 02:49 PM

    Ilya Finkelshteyn's Avatar

    Matheus I could not find your AppVeyor account using email you use on this forum. I used my best guess and bumped artifact for account which is owned by user with the same full name, but different email -- matheusd. Please confirm that this is account you need to unblock.

  6. 66 Posted by frossigneux on 30 Jan, 2018 07:11 PM

    frossigneux's Avatar

    Same problem for my build:
    https://ci.appveyor.com/project/frossigneux/parsec-build
    Could you unblock my account?
    Thanks

  7. Support Staff 67 Posted by Ilya Finkelshte... on 30 Jan, 2018 10:14 PM

    Ilya Finkelshteyn's Avatar

    frossigneux should be good now.

  8. 68 Posted by Matheus Degiova... on 31 Jan, 2018 08:58 AM

    Matheus Degiovani's Avatar

    Hello Ilya,

    That's the one, I should have posted the link to the actual repo.

    Thank you!

  9. 69 Posted by François Rossig... on 31 Jan, 2018 09:13 AM

    François Rossigneux's Avatar

    Thank you.
    I did a mistake: when I saw the "1000 Mb" error yesterday, I thought
    firstly that my Github quota was exceeded and that AppVeyor had problems to
    push the artifacts.
    So I deleted and recreated my Github repository in order to clean all the
    releases quickly.
    The problem is that AppVeyor have tried to rebuild all the previous
    releases (more than hundred, not just one!), so my quota now exceed 10Gb!!
    Could I ask you to clean all those artifacts ?
    Many thanks

    *François ROSSIGNEUX*
    +33 (0)6 52 06 03 06

    SCILLE SAS <http://scille.eu/> (Clé publique
    <http://www.scille.eu/Scille.pub>)

  10. Support Staff 70 Posted by Ilya Finkelshte... on 31 Jan, 2018 06:13 PM

    Ilya Finkelshteyn's Avatar

    François, right now we cannot delete artifacts and working on providing this ability to customers. For those who are blocked we are simple increasing the limit. We did that for you too yesterday, you should be good now.

  11. 71 Posted by splix on 31 Jan, 2018 06:47 PM

    splix's Avatar

    ​—
    Splix (Igor Artamonov)
    ETCDEV - https://www.etcdevteam.com
    Ethereum Classic core projects

  12. 72 Posted by François Rossig... on 31 Jan, 2018 07:08 PM

    François Rossigneux's Avatar

    Yes, it was fine yesterday but I as explained, it triggered the rebuild of
    all my dirty releases I had removed previously on Github. So my 10Gb quota
    I full again. Is there a mean to reset my quota and delete all?
    Thanks

  13. Support Staff 73 Posted by Ilya Finkelshte... on 31 Jan, 2018 07:27 PM

    Ilya Finkelshteyn's Avatar

    François, I wish we could delete all, but for now we can only increase it :/ You should be good now again.

  14. Support Staff 74 Posted by Ilya Finkelshte... on 31 Jan, 2018 07:30 PM

    Ilya Finkelshteyn's Avatar

    splix I believe I decipher your message and account name correctly :) Let us know if you are still blocked.

  15. 75 Posted by Dominic Bou-Sam... on 31 Jan, 2018 11:56 PM

    Dominic Bou-Samra's Avatar

    We also have this issue.

  16. Support Staff 76 Posted by Ilya Finkelshte... on 01 Feb, 2018 12:41 AM

    Ilya Finkelshteyn's Avatar

    Dominic, I assume account is ImageIntelligence. It is unblocked. Note that this restriction does not apply at all to paid plans.

  17. 77 Posted by Dominic Bou-Sam... on 01 Feb, 2018 12:51 AM

    Dominic Bou-Samra's Avatar

    Thanks it appears fixed now:

  18. 78 Posted by chad on 01 Feb, 2018 04:55 AM

    chad's Avatar

    We're also blocked here. Our artifact is only 8kb. We did used to have a paid account which may have had a higher limit, but this is for an OSS project.

  19. Support Staff 79 Posted by Ilya Finkelshte... on 01 Feb, 2018 05:07 AM

    Ilya Finkelshteyn's Avatar

    chad unblocked

  20. 80 Posted by al3xst on 02 Feb, 2018 06:53 PM

    al3xst's Avatar

    Our OSS project at https://ci.appveyor.com/project/knossos/knossos also run into this problem.

    We would gladly remove every artifact, since we are pushing them to github. (They are about 70mb each)
    Is there a way to delete every artifact?

  21. 81 Posted by Jack on 02 Feb, 2018 09:36 PM

    Jack's Avatar

    We're blocked at https://ci.appveyor.com/project/LBRY/lbry , could our limit be raised as well?

    Thanks,

  22. Support Staff 82 Posted by Ilya Finkelshte... on 02 Feb, 2018 11:01 PM

    Ilya Finkelshteyn's Avatar

    al3xst, Jack unblocked.

  23. 83 Posted by François Rossig... on 03 Feb, 2018 07:31 AM

    François Rossigneux's Avatar

    *François ROSSIGNEUX*
    +33 (0)6 52 06 03 06

    SCILLE SAS <http://scille.eu/> (Clé publique
    <http://www.scille.eu/Scille.pub>)

  24. Support Staff 84 Posted by Ilya Finkelshte... on 03 Feb, 2018 03:12 PM

    Ilya Finkelshteyn's Avatar

    frossigneux unblocked

  25. 85 Posted by Igor Gassmann on 06 Feb, 2018 03:13 PM

    Igor Gassmann's Avatar

    Hey Ilya,

    The error keeps happening to our two repositories:
    https://ci.appveyor.com/project/LBRY/lbry-electron
    https://ci.appveyor.com/project/LBRY/lbry

    Any idea for how to fix it?

    Best,
    Igor

  26. Support Staff 86 Posted by Ilya Finkelshte... on 06 Feb, 2018 05:46 PM

    Ilya Finkelshteyn's Avatar

    Igor, we increased this limit for you one more time. I have to admit that this does not look very smart, but we will keep do manual fixes like this until retention policy is ready (should be soon).

  27. 87 Posted by lala on 07 Feb, 2018 11:58 AM

    lala's Avatar

    Same issue again. https://ci.appveyor.com/project/MuseScore/musescore/

    Is there any way to have artifacts uploaded only for PR ?

  28. 88 Posted by Igor Gassmann on 07 Feb, 2018 12:52 PM

    Igor Gassmann's Avatar

    Hey Ilya,

    We received the increase, but it doesn't seem to solve the problem for whatever reason. Do you have any idea why it keeps happening? Our artifact certainly doesn't take up all that space.

    Best,
    Igor

  29. Support Staff 89 Posted by Ilya Finkelshte... on 07 Feb, 2018 06:14 PM

    Ilya Finkelshteyn's Avatar

    Igor, lala, we increased limits for you once more. Sorry for this manual approach, we were needed to implement that limits asap (before proper retention made) to prevent abuse.

    lala: You can publish artifacts with script and have a condition to check if APPVEYOR_PULL_REQUEST_NUMBER Environment variable is defined.

  30. 90 Posted by alby128 on 10 Feb, 2018 06:48 PM

    alby128's Avatar

    We are experiencing the same issue in our open source project:
    https://ci.appveyor.com/project/Et0h/syncplay/build/1.0.87

    Could you please increase our limit? Also, since we are deploying to Bintray, it is possible to disable artifact storage on Appveyor entirely, or to delete all the artifacts stored on Appveyor? Thanks.

Comments are currently closed for this discussion. You can start a new one.

Keyboard shortcuts

Generic

? Show this help
ESC Blurs the current field

Comment Form

r Focus the comment reply box
^ + ↩ Submit the comment

You can use Command ⌘ instead of Control ^ on Mac